Re: Boolean not working very well?
Still not working.
Here's what I'm doing. I'm trying to cut a passageway opening in a bulkhead in an aircraft. The bulkhead is a section of surfaces on the inside of the "Fuselage" object. The "hole" is an extruded polygon placed to intersect the bulkhead. I can clearly see two sides of the "hole" object out of each side of the bulkhead surface.
Open Tools/Boolean Operation... .
Select the Fuselage. Click into Operand B, and click Set.
Select the Hole poly. click into Operand A, and click Set. Click Delete.
Select Subtraction, B-A.
Click OK to make the operation. I'm assuming A, the Hole will be cut from B Fuselage and that A will be deleted, leaving a hole in B.
All that happens is that A "disappears. B has no hole in it.
__________________
Flight Sim Project Contributor
My Gaming Rig:
i5 2500K Quad-Core CPU at 3.3GHz
MSI P67A-C43 mobo
4GB of PC12800 DDR3 memory
Windows 7
1GB Galaxy GeForce GTX550 Ti video card GeForce 270.61 drivers (4/2011)
Cougar joystick/throttle combo
CH Pedals
|