1st January 2007, 09:58 PM | #1 |
Junior Member
Junior member
Join Date: Jan 2007
Posts: 3
|
2sided surface problem
Everytime I load up my model that i know has two surfaces it loads up in one surface. I have no idea what to do.
I export it like this Imports like this. . |
2nd January 2007, 06:56 AM | #2 |
Member
Advanced member
Join Date: Sep 2006
Location: herefordshire
Posts: 35
|
Re: 2sided surface problem
Hi not sure what is happening here, which version are you using, and what system you are using ie computer setup you have and the graphics card do you have in the computer. This may help to see what maybe going on.
Dave |
2nd January 2007, 07:40 AM | #3 |
Junior Member
Junior member
Join Date: Jan 2007
Posts: 3
|
Re: 2sided surface problem
I am using the trial version. I am using XP with a Intel(R) 82865G Graphics Controller.
|
2nd January 2007, 05:55 PM | #4 |
Senior Member
Professional user
Join Date: May 2005
Location: Norway
Posts: 883
|
Re: 2sided surface problem
You need to select your model and set it to 1 sided surfaces. Then you select the surfaces facing the wrong way and choose flip surfaces. This is in surface mode. It looks like you have surfaces facing both in and out, and thats why you get some strange resoults when importing your model. It wont help to set it as 2 faced surfaces when exporting. That option is mostly to help you see the model better when working on it.
__________________
..............<<<<My Blog>>>>........... |
2nd January 2007, 06:58 PM | #5 |
Junior Member
Junior member
Join Date: Jan 2007
Posts: 3
|
Re: 2sided surface problem
Hey that works thanks tbd.
|
|
|