7th December 2005, 05:47 AM | #1 |
Senior Member
Professional user
Join Date: Nov 2004
Posts: 191
|
Dots on surface
http://www.tomah.com/delliott/image1.jpg
The junction or transition was made using the extrusion tool, meaning first the angled object was created, then the narrow end was extruded into a straight section, my question is how do I elimanate the dots which appear on the surface. Thanks |
7th December 2005, 06:09 AM | #2 |
Administrator
Professional user
Join Date: Jun 2003
Posts: 4,565
|
You probably have a surface in there. In vertex mode, select all the vertices around that area. Switch to surface mode and see if you have one surface selected. If you have, then it's probbaly one 'hidden' in the middle of the model. Press delete to remove it.
Andy |
7th December 2005, 07:27 AM | #3 |
Senior Member
Professional user
Join Date: Nov 2004
Posts: 191
|
Dots on surface
Thanks that removed the dots completely. Now I see a faint joint or crease at the junction, did I shift of move something when building the object? TIA
|
7th December 2005, 08:32 AM | #4 |
Administrator
Professional user
Join Date: Jun 2003
Posts: 4,565
|
If it doesn't appear from all angles, it's probably normal.
|
|
|