|
15th September 2006, 03:24 PM | #1 |
Junior Member
Junior member
Join Date: Sep 2006
Posts: 1
|
Looking at AC3D for hame project use.
I am going to kee this short. I downladed the demo to see if this package fits my needs. It comes at a very comparable price. Go the demo started working. Are there commands to Arc, Trim, and Fillet. I come from CAD, so are the substitutes.Trim and Fillet I can get around, I just really need the Arc?
Any help apreciated. |
15th September 2006, 07:19 PM | #2 |
Senior Member
Professional user
Join Date: Mar 2006
Location: elma washington
Posts: 805
|
Re: Looking at AC3D for hame project use.
hmmmm on the arc question you could use the line tool to get the desired shape.
|
16th September 2006, 07:41 AM | #3 |
Member
Expert member
Join Date: Dec 2003
Posts: 55
|
Re: Looking at AC3D for hame project use.
You can try using the make Oval tool to create an arc. In vertex mode delete the side of the oval you do not need. Extrude the remaining surfaces to give the arc some dimension.
If you do not need the flat side of the remaining arc, then switch to surface mode and select the flat surface and delete. Delete any other surfaces you don't need in this fashion as well. You can now manipulate each vertex to fit whatever you want the arc to fit. This is not as "easy" as the arc tool in Cad. But this should work. |
Thread Tools | |
Display Modes | |
|
|