|
6th February 2022, 01:31 PM | #1 |
Senior Member
Professional user
Join Date: Dec 2004
Location: Corsicana, Texas
Posts: 133
|
A simple line won't accept color ???
I used to be able to create a "line" consisting of two or more vertices and give it a color like Red, but now a line won't accept a color or at least the color doesn't show up on the display. I used the line to create a path for extrusion.
I am running in Windows 11 with an NVIDIA GeForce GT220 graphics card. Is there something that I need to tweak? |
10th February 2022, 05:22 AM | #2 |
Administrator
Professional user
Join Date: Jun 2003
Posts: 4,565
|
Re: A simple line won't accept color ???
No known problems with a system like that.
Make sure the surface-type is line (otherwise it's a bad polygon). If the line is selected, it may not show color changes. Press the eye icon (top left of views) to see a clean image with no selection. Let me know if you still have problems. |
10th February 2022, 12:30 PM | #3 |
Senior Member
Professional user
Join Date: Dec 2004
Location: Corsicana, Texas
Posts: 133
|
Re: A simple line won't accept color ???
I always select "line" for the surface type. The line that I create shows up on the display as gray regardless of what color I select. If I select "surface" mode and then select the line, the message at the bottom of the screen says that the material selected is "3" (if I specified Red).
Clicking on the Inspect (or eye) icon removes grid lines and vertices, but the line still appears gray. Changing the thickness of the line to "2" didn't help. I think that I am going to try reinstalling AC3D to see if the problem is still there. |
10th February 2022, 12:37 PM | #4 |
Administrator
Professional user
Join Date: Jun 2003
Posts: 4,565
|
Re: A simple line won't accept color ???
It could be a graphics library problem but nVidia libraires are usually excellent.
Perhaps check the control panel for the graphics card and see if any settings jump out as a possible problem. Particularly look for anti-alias being switched on since that can interfere with selection when "select-through" is switched off. |
10th February 2022, 03:00 PM | #5 |
Senior Member
Professional user
Join Date: Dec 2004
Location: Corsicana, Texas
Posts: 133
|
Re: A simple line won't accept color ???
I have tried turning the Anti-Aliasing off, but it didn't help. I have attached an image
of the NVIDIA control panel settings for ac3d. Any suggestions about what to tweak? |
10th February 2022, 04:29 PM | #6 |
Administrator
Professional user
Join Date: Jun 2003
Posts: 4,565
|
Re: A simple line won't accept color ???
They look OK, as far as I can see.
Is this a new graphics card or computer, or OS/Drivers? |
|
|