11th March 2007, 03:14 PM | #1 |
Junior Member
Junior member
Join Date: Mar 2007
Posts: 5
|
Cutting out shapes
Ok i've worked out that if i use boolean subtract, i can cut out the shapes i want, but i have a problem that it sometimes leaves a mess after cutting, it seems if i adjust the position of the shape i am going to cut out, it sometimes makes a clean cut !
Here's a couple of pic's of the problem: before: After Messy: Any ideas what i can do?? Thanks ------------------------------------------------------ Firstly hi to all here I have just started out learning to use ac3d, i am trying to model an airplane i have as a first project, it's a simple design as it has a flat profile fusealage, the only thing not flat are the wings! Ok so i have searched, found a few answers to my question, but i am still stuggling to do what i want, which is cut out different shapes from my fusealage, here's a picture: ok so i want to cut out the squarish looking box and leave a hole the same shape where the box used to be, there are many more shapes like this one from round,oval ect... Any help would be much appreciated Grale Last edited by Grale; 12th March 2007 at 02:52 PM. |
|
|