Wineglass as sculpty for SL

anca13 · 26th October 2009, 06:59 PM

Hi,

Nooby is not the word to describe me

I followed anything, which was posted about the wineglass including written and video.

As follows:

1) Picked "1 object"
2) Picked "Line"
3) Draw "wineglas" left side only.
4) Revolve around "Y", 360 degrees and 24 Segments
5) Open TCE
6) Open UV Map
7) Wrap around "Y", Shape Mapping "Cylindrical, 360 Degrees3
8) Close both
9) Export to SL "Second Life Sculpted Prim"
10) In SL, Upload *.tga, Object set to "sculpty" and "Cylinder"

Result "half of bowl" is "missing" except when I rotate it shows up, but from the side and top it appears to be missing.

What did I do wrong? Did I miss a step?

Please let me know. Thanks.

anca13

26th October 2009, 06:59 PM	#1
anca13 Junior Member Junior member Join Date: Jan 2008 Posts: 2	Wineglass as sculpty for SL Hi, Nooby is not the word to describe me I followed anything, which was posted about the wineglass including written and video. As follows: 1) Picked "1 object" 2) Picked "Line" 3) Draw "wineglas" left side only. 4) Revolve around "Y", 360 degrees and 24 Segments 5) Open TCE 6) Open UV Map 7) Wrap around "Y", Shape Mapping "Cylindrical, 360 Degrees3 8) Close both 9) Export to SL "Second Life Sculpted Prim" 10) In SL, Upload *.tga, Object set to "sculpty" and "Cylinder" Result "half of bowl" is "missing" except when I rotate it shows up, but from the side and top it appears to be missing. What did I do wrong? Did I miss a step? Please let me know. Thanks. anca13