21st July 2017, 05:27 AM | #1 |
Junior Member
Junior member
Join Date: Jul 2017
Posts: 4
|
Hollow Object
I would like to make a hollow object -> thin peripheral wall. When I try to do a boolean subtract with a downscaled object of the original, I am not able to select the smaller object within the other because it is invisible and not therefore not clickable. Any suggestions welcome. Georg
|
23rd July 2017, 04:40 PM | #2 | |
Senior Member
Professional user
Join Date: May 2004
Location: Vienna / Austria
Posts: 207
|
Re: Hollow Object
Quote:
or simply select the second object in the Hierarchy window? or lock the outside object in Hierarchy then your select will only get the inner one? or, for a peripheral wall, put 2D outlines on the floor and extrude upwards. cheers peter
__________________
-- P e t e r M e i n i n g e r ------------------------------------ The X-Plane Freeware Project |
|
24th July 2017, 04:16 AM | #3 |
Junior Member
Junior member
Join Date: Jul 2017
Posts: 4
|
Re: Hollow Object
Thank you, Peter!
In the mean time I have found a similar solution: I name the inner object "inner_object" then select the outer and select by name the inner_object. Then the boolean subtract works. Hide or lock does not work as the boolean extrude does not recognize two selections when the first gets hidden or locked after beeing selected.. Seeing that you come from the Xplane community so do I. I have modelled my airplane, a Scandinavisk Aero Industrii KZ-7 "Lark" with the Planemaker. Now I try to print it on a 3D printer. This is pretty challenging for me as the planemaker designs are for "looks" only and not for "volume". |
|
|