|
13th November 2018, 04:29 PM | #1 |
Junior Member
Member
Join Date: Nov 2018
Location: Haute-Savoie, France
Posts: 14
|
Re: Subtract a tube from a wall
Hi,
I tried all your suggestions without success. Therefore i tried to simplify the problem by creating a tube and 'knife' it in a single surface of the wall. i obtained the attached result (not a hole in the wall) Did i do something wrong ? Best Chris |
14th November 2018, 04:22 AM | #2 |
Administrator
Professional user
Join Date: Jun 2003
Posts: 4,565
|
Re: Subtract a tube from a wall
try doing the knife with a cylinder (i.e. enclosed 3d shape), not a tube.
Last edited by Andy; 14th November 2018 at 04:25 AM. |
17th November 2018, 03:36 PM | #3 |
Junior Member
Member
Join Date: Nov 2018
Location: Haute-Savoie, France
Posts: 14
|
Re: Subtract a tube from a wall
|
18th November 2018, 05:04 PM | #4 |
Administrator
Professional user
Join Date: Jun 2003
Posts: 4,565
|
Re: Subtract a tube from a wall
Select the surfaces inside the circle and delete them. Or, Surface->cut-away-object if you want to put them into a new object.
|
5th February 2019, 09:07 PM | #5 |
Junior Member
Junior member
Join Date: Feb 2019
Posts: 2
|
Re: Subtract a tube from a wall
Create a tube that is longer than the wall thickness and the circular size you want. Move the tube to intersect and go thru the wall.
Select Wall first. Then shift-select the Tube. Goto Object menus- Goto to Boolean Select "Subtract" This should make a perfect hole in the wall. It will create triangular sections on the wall allow for the cutout sections- these will still be grouped with the wall. |
|
|