Extrude scale...

Spinner · 31st July 2005, 07:27 AM

Settings at default.
Create box yields a 1x1x1 large grid square box. Resizing with Y1xX1xZ10 stretches the box to 10 large grid squares in Z axis, as you would expect.
Create elipse. Then extrude by distance Z = 10 with 11 sections, should yield an extension 11 large grid squares long in Z axis, with a section at each large grid square, if I understand correctly the scale.
It yielded an extension of 11 sections over a distance in Z axis of 1.1 large grid squares.
So 1 in resize = one large square and 1 in extrude by distance = 0.1 large grid or 1 small grid square. Shouldn't they be the same unit?
No big deal but worth mentioning
Spinner

31st July 2005, 07:27 AM	#1
Spinner Senior Member Professional user Join Date: May 2005 Posts: 147	Extrude scale... Settings at default. Create box yields a 1x1x1 large grid square box. Resizing with Y1xX1xZ10 stretches the box to 10 large grid squares in Z axis, as you would expect. Create elipse. Then extrude by distance Z = 10 with 11 sections, should yield an extension 11 large grid squares long in Z axis, with a section at each large grid square, if I understand correctly the scale. It yielded an extension of 11 sections over a distance in Z axis of 1.1 large grid squares. So 1 in resize = one large square and 1 in extrude by distance = 0.1 large grid or 1 small grid square. Shouldn't they be the same unit? No big deal but worth mentioning Spinner __________________ Spinner Blessed are the cracks, For they let in the light

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode