Go Back   AC3D Forums > General > AC3D General
Register FAQ Members List Calendar Search Today's Posts Mark Forums Read

Reply
 
Thread Tools Display Modes
Old 8th November 2003, 12:14 PM   #1
Joey Tempest
Junior Member
Junior member
 
Join Date: Nov 2003
Posts: 1
Default AC3D --> DXF

Hi, I got a problem with converting my AC3D file into DXF file. I'm using the program for fire simulation in the program SOFIE, but if I can convert the ac file into an DXF then the program FDS from Nist homepage, can be verry useful for me.
On this page (link on the bottom) there is a program called dxf2fds it converts the DXF file to an FDS file. But it doesent seem to woork cause the DXF file from AC3D is not correctly done, or something.
Whats wrong with this?

http://www.fire.nist.gov/fds
http://www.fire.nist.gov/fds/refs/tools.html


thx
Joey
Joey Tempest is offline   Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off



All times are GMT -4. The time now is 05:40 AM.


AC3D Forum
(C) Inivis Limited 2020