![]() |
#1 |
Junior Member
Junior member
Join Date: Aug 2006
Posts: 2
|
![]()
Hi I am a new user and still getting to grips with this package, I have a part which is a bunch of cylinders making a type of post. I need to cut a slot right through the top a bit like a milling operation. Any help with this would be greatly appreciated.
|
![]() |
![]() |
![]() |
#2 |
Senior Member
Professional user
Join Date: Mar 2006
Location: elma washington
Posts: 805
|
![]()
have you tryed using boolean?
|
![]() |
![]() |
![]() |
#3 |
Junior Member
Junior member
Join Date: Aug 2006
Posts: 2
|
![]()
Ah another term I havent seen in the software yet. I'll have a look in the manual.
|
![]() |
![]() |
![]() |
#4 |
Senior Member
Professional user
Join Date: Mar 2006
Location: elma washington
Posts: 805
|
![]()
there is a tool bar on ac3d if you scroll down you will see something called boolean.
I think if you use that it will work |
![]() |
![]() |
![]() |
#5 |
Senior Member
Professional user
Join Date: Feb 2004
Location: Portland, OR
Posts: 604
|
![]()
Ewwww...Booleans are rather messy.
If it works really nice, and the slot looks good, fine... But if it leaves a mess, like it does with other similar operations, try this. Use a rectangle as a Knife to cut the dimensions of the slot through the cylinder, and remove it. Fill in the "inside edges" of the slot after you remove the outer area.
__________________
Flight Sim Project Contributor My Gaming Rig: i5 2500K Quad-Core CPU at 3.3GHz MSI P67A-C43 mobo 4GB of PC12800 DDR3 memory Windows 7 1GB Galaxy GeForce GTX550 Ti video card GeForce 270.61 drivers (4/2011) Cougar joystick/throttle combo CH Pedals |
![]() |
![]() |
![]() |
#6 |
Senior Member
Professional user
Join Date: Mar 2006
Location: elma washington
Posts: 805
|
![]()
I do agree that booleans are messy but they do get the job done. in any case from what I have noticed when using boolean is that it creates an exact duplicate of your model thus having more polys and surfaces.
I would rather go with knife. but the boolean was a suggestion. |
![]() |
![]() |
![]() |
#7 |
Senior Member
Professional user
Join Date: Feb 2004
Location: Portland, OR
Posts: 604
|
![]()
You can set the boolean up NOT to create a second shape, but to discard the original.
__________________
Flight Sim Project Contributor My Gaming Rig: i5 2500K Quad-Core CPU at 3.3GHz MSI P67A-C43 mobo 4GB of PC12800 DDR3 memory Windows 7 1GB Galaxy GeForce GTX550 Ti video card GeForce 270.61 drivers (4/2011) Cougar joystick/throttle combo CH Pedals |
![]() |
![]() |
![]() |
#8 |
Senior Member
Professional user
Join Date: Mar 2006
Location: elma washington
Posts: 805
|
![]()
how would that be done I am still a noob when it comes to using boolean
|
![]() |
![]() |
![]() |
#9 |
Senior Member
Professional user
Join Date: Feb 2004
Location: Portland, OR
Posts: 604
|
![]()
In the dialog where you set the A and B operands of the Boolean, check the little box that says something like, "Keep original" or something like that. Check it for both the operands and I believe the result should be just the cut piece remains.
I say should because I've had some problems getting the results I have wanted with Booleans... but, what you want IS possible in some way. Monkey around with the settings and you'll stumble on it.
__________________
Flight Sim Project Contributor My Gaming Rig: i5 2500K Quad-Core CPU at 3.3GHz MSI P67A-C43 mobo 4GB of PC12800 DDR3 memory Windows 7 1GB Galaxy GeForce GTX550 Ti video card GeForce 270.61 drivers (4/2011) Cougar joystick/throttle combo CH Pedals |
![]() |
![]() |
![]() |
#10 |
Senior Member
Professional user
Join Date: Mar 2006
Location: elma washington
Posts: 805
|
![]()
okay thanks alot
|
![]() |
![]() |
![]() |
|
|